PDA

View Full Version : coil and plug wire applications


camaro-sb350
08-19-2003, 05:24 PM
I am going to be installing an 85551 Billet Distributor along with the 6AL Ignition Module in a smal block 350. Which external coil and plug wire set would work for street/strip use? Here's the dumb part of the question: Does the coil wire come with the plug wire sets? I've seen just single coil wires listed and "other suggested items to buy" while shopping the dist/module.
Thanks

msdtech1
08-19-2003, 09:52 PM
The coil wire normally comes with the wire set if the set was originally for a vehicle that was equipped for a engine with an external coil. For your application I would suggest the MSD 8.5mm Super Conductor Wire set, PN 35659. For the coil I would use the MSD Blaster 2, PN 8202, if you want to keep the canister style look or the MSD Blaster SS, PN 8207, if you are looking for a coil with a more custom look.

MSD Tech1

camaro-sb350
08-20-2003, 09:48 AM
Thanks for the P/N's. So, I guess a coil wire needs to ordered separately since I am installing in an 85 Camaro, which originally came equipped with an internal coil?

matronyx
08-20-2003, 02:33 PM
I have a 1999 Mitsubishi Lancer MR (MIVEC 1600).
Chassis: CK4A-0300252
Engine: 4G92
I need to replace my two ignition coil packs.
What product would you recommend from MSD website as a replacement?

msdtech1
08-20-2003, 10:21 PM
You do not need to order the coil wire seperately for the set I recommended to you. That particular set comes with a 12" coil wire that includes a blaster coil boot on one end and a HEI style 90 degree boot for the distributor cap end.

MSD Tech1

camaro-sb350
08-21-2003, 02:06 PM
Thank you, you guys are great! Can't wait to "fire it up!"

msdtech1
08-21-2003, 06:36 PM
Your welcome.

MSD Tech1