View Full Version : msd6al on 86 gt

08-18-2003, 09:02 PM
ok i have all your materials as in books and parts catalogs my question to u is im about to hook up my msd 6al and my qustion is can i hook my positive wire from msd 6al to + side of the firewall solenoid since battery is in hatch. and also can i hook the negative wire from 6 al to the - wire(6guage) coming from the negative off the battery in the trunk where it grounds to the block and chassis? instead of running wires to the hatch to connect to the battery, also will my kill switch interfere with the 6 al when i switch the cars electical off? also i have the wire harness for the tfi if that makes any difference...
thanks for the info in advance

08-18-2003, 10:32 PM
The heavy gauge MSD Red wire can be hooked to the starter solenoid on your firewall and the Black wire can be hooked to the same location where the negative battery cable is attached to the engine block. If your kill switch is on the main power lead from the battery then when you turn the kill switch to shut the power off the MSD will be disconnected as well.

MSD Tech1