View Full Version : 6AL Wiring For RX-7 12A

08-12-2003, 09:34 AM
When using a 2 6AL modules to fire both leading and trailing spark on a rotory, is it advisable to remove the ignitors and wire the purple and green wires directly to the magnetic pickups or leave the stock ignitors in place and use the white wire instead? If you suggest leaveing the ignitors in place, what should be wired to each of the two terminals on the ignitor plugs? I know how to check the polarity if wiring the module directly to the magnetic pickups using the purple and green harness.

08-12-2003, 09:18 PM
Do not use modules hook the wires directly. make sure u conect green from msd to purple on the car and the purple from the msd to green from the car.

we do a lot mazda performance!
more question email me benyamb@hotmail.com