View Full Version : 3-Step install

08-09-2003, 12:15 PM
Let me start by sayin' that the whole ignition is MSD.8361 dist,6AL,coil and wires.
I have a 3-step that I want to install that came with no instructions. How could I get hard copies for my files,either over the net(e-mail) or US Postal. I can not get my PC to read the instructions you have on the site,yes I have adobe reader.Steve

08-09-2003, 06:45 PM
Reinstalled adobe and the PC worked! I have my hard copy now.Steve :)

08-09-2003, 08:15 PM
Great! Now you can download any of the instructions that you need. If you need a set that are not listed, then let us know and we will get them .pdf'ed for you.

MSD Tech1

08-10-2003, 04:22 PM
Hey! what switches do Autotronics sells for the three step and there part numbers?
BTW How can I test this unit(#8737)I bought it used?Need to make sure it is operating propery before I install.

08-12-2003, 05:46 PM
The only switch we offer is the PN 8820 Micro Switch. The only way to test the unit is to connect it to a rev limiter, like on a 6A-L, and apply 12 volts to the wires. With some 3000 chips in place to make sure each module works.