PDA

View Full Version : MSD Ignition for LT1


94z28
08-08-2003, 10:10 AM
My 94 Camaro with the LT1 has a miss fire at WOT in the 2-3 upshift (4L60E Auto). What MSD ignition would you recommend for this engine. I have looked at your PN7000 stacker as well as the 6A and 6AL. Would the Digital system work better.

I am planning on replacing my plugs, wires, coil, coil wire to Optispark and adding an igmition. Hope not to replace the Optispark as it was replaced when I added an electronic water pump about a year ago.

Thanks!

msdtech1
08-08-2003, 12:54 PM
The MSD 6AL would be great for your LT-1 engine. If you are planning on adding nitrous to it then I would also consider the Digital 6, PN 6520, as well. Both units will perform well on your engine. You may want to look at our MSD Super Conductor Spark Plug Wires, PN 32149. They have very low rsistance 40-50 ohms with high noise suppression. We also off a Blaster Coil, PN 8226, and installation harness, PN 8876, that will help you with the install as well.

MSD Tech1