View Full Version : Nos Connection

11-04-2004, 11:19 AM
I have the 7530T msd, 1. do I need additional equip to make it activate my already functioning 2 stage nos? 2) how do I program it into the box

11-04-2004, 04:14 PM
You can use the RPM window switch to activate your nitrous system. However, you will need to use a 5 pin, 30 amp relay. Our PN 8961 is prefered, but any 30 amp type will be just fine. The window switch output wire will basically "ground" the relay. The activation wire is only rated up to 3 amps and the solenoids will sometimes draw a little more than that. The relay can then be set up in various ways to activate the solenoids. If you can, send us a fax number and we'll get you out a diagram.

11-05-2004, 09:08 PM
Could you please fax that relay diagram to me I am using the 8979 with your digital window switch



11-06-2004, 07:02 AM
Yes please fax me the diagram at 954-480-4496
Attn:M. Peak

11-11-2004, 10:43 AM
Did both of you get the fax?

12-15-2004, 03:21 AM
can you please also fax the diagram to me? +64 9 524 5246