PDA

View Full Version : Msd pro mag 12


cheyenne580
08-26-2012, 04:48 PM
I've been told that the Pro Mag 12 has a problem with starting and they have to be sent back to be modified to the 20 amp.Is there any truth in this rumor?

Jim

msdtech1955
08-28-2012, 06:38 AM
thats a loaded question ...:laugh:

not knowing if your using 12 volts or 16 ? starter

turning a blower belt?............etc.basically, not having the info on the combo..makes it hard to give a general answer.

cheyenne580
08-28-2012, 08:23 PM
I'm thinking about going to the 16 volt but at this time i have the 12 volt.And yes i'm turning a blower belt.The starter is a gear reduction.so what i've heard is that the 16 volt will not hurt my racepak or any other part of my system.Any suggestions on this topic would be helpful.

msdtech1955
08-29-2012, 07:18 AM
the tighter the blower..the lower the cranking speed .. so ,yes...i would use either 16 or 18 volts to get that cranking speed up.

also, keep in mind that the 20 has more current then the 12amp...
which will also start a little easier ...are you using gas or alcohol to start it ?

cheyenne580
08-29-2012, 06:14 PM
I use gas {C16} when the temp is below 70 degree's to start it but i usually use alky to start it.Is this wrong to do?

Jim

msdtech1955
08-30-2012, 06:52 AM
starting them up on gas , makes it a "ton" easier ...

cheyenne580
08-31-2012, 11:42 AM
starting them up on gas , makes it a "ton" easier ...

but a little gas goes a long way in starting

moomblue
10-18-2012, 02:52 AM
good post
















--------------------------------------------------------------------------------------------------
Cheap Wedding Dresses (http://www.mrmrsweddingonline.com/)