PDA

View Full Version : Help to programing MSD 7730


caillahuz
07-14-2012, 01:23 AM
Help to programing MSD 7730
I have the MSD 7730 with 6AL Digital ignition module and crank trigger in a 4 cylinder engine. I mounted the crank trigger in a 30 grades of BTDC. Now, when I setup the unit, I have a clock with grades information, a red zone and a green zone. When the arrow are moving in the red zone, the timing dont move, when I check with stroboscope lamp; but when the arrow are moving in the green zone, the timing starting to move, when I check with stroboscope lamp in the crank. can you help me to program this unit?, Really the manual is very condensed.
Thank you so much.

msdtech1955
07-16-2012, 09:54 AM
http://www.msdignition.com/forum/showthread.php?t=18197