View Full Version : Phasing 44 Mag ccr
01-30-2012, 08:59 PM
I had a new pickup installed, could the pickup wheel have been installed wrong?
Great spark out of coil wire, nothing out of cap.
When pickup is lined up the rotor is between post.
01-31-2012, 08:37 AM
ok, lets get some info..is it just a mag or with a crank trigger ?
01-31-2012, 09:57 AM
01-31-2012, 01:34 PM
only way that could happen ...if the reluctor on the shaft was moved.. or the
magnet was installed upside - down.
01-31-2012, 03:10 PM
I will check that and let you know.
02-07-2012, 07:48 AM
02-12-2012, 10:48 PM
Sorry for the delay I have been working out of state.
My magnet dose not have any identifying marks on it.
Does your support truck have them if so I will pick one up at the races.
Thanks for all of your help it is greatly appreciated.
vBulletin® v3.8.7, Copyright ©2000-2015, vBulletin Solutions, Inc.