PDA

View Full Version : three step install


fast90mustang
04-14-2011, 06:52 PM
can a three step be used for holding my racecar on the starting line(with a lineloc) without a transbrake??I have nitrous activated by a full throttle switch, so the nitrous will have to be off till I release the three step. I'd like to be able to hold my foot to the floor(gas)(other foot on brake or lineloc) till I release the linloc/three step button. It sounds like alot of wiring. also, when the nitrous is activated, I have to take ground from my retard box.

msdtech1955
04-15-2011, 10:08 AM
what rpm do you leave at ?
what rpm stall?

fast90mustang
04-19-2011, 04:54 PM
plan on leaving between 2600-3000 rpm.. have a 4000 stall. no brake. have a line-lock to install

msdtech1955
05-17-2011, 09:37 AM
what ignition do you have .
1502

fast90mustang
05-17-2011, 05:01 PM
6al with 3 stage retard, 3 step,rpm dails, NOS 15834 progressive controller, dual stage nitrous(powershot solenoids) I have plenty of relays with plug in harnesses(10 amp and 30 amp)also have a window switch.