PDA

View Full Version : msd6a


dcracer
07-30-2003, 04:16 PM
msd 6a can i use this on my 4cyl modified 2.0 pinto eng with an autometer tach, I am currently turning about 8000 rpms, and what spark plug would you recomend and what gap, I am using a unilite electronic dist. thanks dennis

msdtech1
07-31-2003, 08:44 AM
Yes, you can use the MSD 6A on your modified Pinto engine. You can download an installation diagram for hooking the MSD 6A Ignition to your Unilite at the link below.

http://www.msdignition.com/pdf/pdf25.pdf

I would recommend a plug that is one step colder than what is normally used in the engine and set the plug gap around 0.040 if it is normally aspirated.

MSD Tech1

dcracer
07-31-2003, 03:02 PM
:) I want to thank you very much for the diagram and the info, dennis

msdtech1
07-31-2003, 04:30 PM
Your welcome. Glad to help you out.

MSD Tech1