PDA

View Full Version : Yamaha Superjet & MSD Total Loss wiring?


cancermann
07-28-2003, 10:22 AM
From where can I find a wiring diagram for 701 Superjet & Total Loss?
If somebody has ane as digital format, please send it to shotfail@hotmail.com
Thanks :-)

msdtech1
07-28-2003, 10:34 AM
Can you please let us know which CDI ignition you are refering to? There are 4 differnet CDI's it could be, this way we'll send you the right instruction. The part number is located on the top of the ignition label.


Thank you
MSD Tech 1

cancermann
07-28-2003, 12:27 PM
Hi!
I though there is only one, but itīs that Pro Digital ( Multi channel, 00-00-2530 ) CDI.
I have to take a closer look, but it takes few days before I can to do that...
Thanks :-)

msdtech1
07-28-2003, 02:41 PM
We will go ahead and send the instruction sheet to you. You can also download a pdf of it at the web address below.

www.factorydirectperformance.com

MSD Tech1

msd-forums
07-30-2003, 08:47 AM
PN 00-00-2530 MSD Multi-Channel Ignition Control instructions have been uploaded and can be found here:
Factory Direct Performance Instruction Download (http://www.factorydirectperformance.com/dwnload.htm)

cancermann
08-03-2003, 03:20 PM
Hi!
Yes, I found those instructions, but that CDI looks a littlebit different than mine...
http://wave.prohosting.com/impeller/images/msd/ecu_front.jpg
Numbers match: 00-00-2530.
Actually, now I have two different instructions, PN4272 and PN42351. How can I be sure that I have right instructions?
Thanks.

msdtech1
08-04-2003, 10:23 AM
On the side of your ignition unit there is a lot number. Can you please let us know the number so we can see which unit you have.


T

msdtech1
08-04-2003, 10:29 AM
On the side of your ignition unit there is a lot number. Can you please let us know the number so we can see which unit you have.


Thank you
MSD Tech 1

cancermann
08-06-2003, 07:34 AM
Hi.
Lot numbr is 112201. Actually I though itīs the day when it was made... :-D

msdtech1
08-06-2003, 01:23 PM
We looked up your lot number and the unit was produced June 11 of 2001. Here is a link to the instruction you need to wire in the system.

http://www.factorydirectperformance.com/pd..._00_00_2530.pdf (http://www.factorydirectperformance.com/pdf/pn_00_00_2530.pdf)


Thank you
MSD Tech1

cancermann
08-09-2003, 06:16 AM
Thanks!

msdtech1
08-09-2003, 07:23 PM
Your welcome.