View Full Version : msd wiring instructions?
07-20-2003, 10:10 PM
i have a msd 6al ignition box, i need the wiring instructions please.
i also have the blaster coil 3 and msd billet distributor.
just need the color scheme to see what goes where.
07-21-2003, 04:54 PM
You can download the actual installation instructions form the MSD Website at:
I am not sure what you are hooking it to so here is a general hookup of the wires.
Red 12ga - To battery (+) positive.
Black 12 ga - To battery (-) negative.
Red 18 ga - To ignition key switched 12 volts (remove original wires connected to coil (+) and connect to MSD Red 18 ga wire)
Orange 18 ga - To coil (+) positive. This should be the only wire attached to coil (+).
White 18 ga - Not Used.
Black 18 ga - To coil (-) negative. This should be the only wire attached to coil (-).
Violet/Green - Connect to magnetic pickup distributor. Note: if Violet/Green wires are used then the white wire will not be connected.
vBulletin® v3.8.7, Copyright ©2000-2015, vBulletin Solutions, Inc.