PDA

View Full Version : 94 Mustang 5.0 distributor installation


efloyd49
03-04-2006, 03:42 PM
I ordered a MSD distributor PN8455 to install in my stock 5.0. A tag on the distributor says the steel gear on the distributor should only be used on a billet steel camshaft (roller tappet). That on castiron camshafts (flat tappet) the gear should be cast iron. Does anyone now what type of gamshaft is stock in a 1994 Mustang 5.0? I can't find the info anywhere.

Help!

mrbadass
03-06-2006, 03:01 PM
your stock 5.0 should have a billet steel cam which would need a steel gear gear. Sounds like you got the right distributor. All cams from 85-95 Ford 5.0 are steel billet:cool:

msdtech16
03-23-2006, 12:48 PM
The answer give by mrbadass is correct.