Chrysler Pro-Billet, Small Diameter V8
Since many Chrysler enthusiasts use the B1 head or aftermarket valve covers, these Pro-Billet Chrysler Distributors have been designed with a small diameter housing. This allows the distributors to fit even the tightest block and head combinations.
Both models are based on a CNC-machined aluminum housing and base. A QPQ coated shaft spins in two sealed ball bearings for high rpm survival.
For accurate timing, a high output magnetic pickup is used that plugs directly into your MSD Ignition Control. There is an easy-to-adjust mechanical advance mounted on top of each distributor and is easily tuned with an assortment of supplied advance stop bushings and advance springs.

NOTE: Must be used with an MSD 6, 7, 8 or 10 Ignition Control. Supplied with cap and rotor. Does not accept a vacuum advance.

Chrysler Pro-Billet Distributor, 383, 400
PN 8545*

Chrysler Pro-Billet Distributor, 440, 426
PN 8546*


PN 8545 and PN 8546

*Not legal for sale or use on pollution controlled vehicles.