This diagram illustrates how to install a timing control with a 6 series ignition on a Ford TFI fuel injection application with the PN 8874 adapter harness.

This diagram illustrates how to install a PN 8680 timing control, a Vortech BTM, and a 6 series ignition with the PN 8874 Ford TFI fuel injection harness.

This diagram illustrates wiring a FAST EDIS controller on a Ford to a DIS-4 Ignition.

This diagram illustrates the installation of a DIS-4 to Ford 6 Cyl applications with a single coil pack. This would apply to Ranger/Tbird/Mustang/Explorer/F-Series.

This diagram illustrates how to wire up a two DIS-4 units and four 89121 ignition adapters without the PN 88813 harness on 1999-up Coil per cylinder Ford applications (4.6L/5.4L).

This diagram illustrates the wiring of the Ford Ignition (PN M12199B351) built by MSD.

TFI Ford Module Pin out.

This diagram illustrates how to install an MSD ignition and a timing control to a Ford TFI fuel injection application without a PN 8876 Harness.

This diagram illustrates how to install a 6 series ignition without a TFI harness.

This diagram illustrates how to install a DIS-4 and 2 Tach adapters PN 8912 to a 1991 Ford Explorer.

This diagram illustrates how to wire up a 6 series ignition with a Ford TFI fuel injection, yet the installation utilizes a Blaster 2 coil rather than the stock coil.