Chevy V8 Tall Block w/Slip Collar Marine Distributor

Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration and harsh vibrations all take their toll. The MSD Pro-Billet Distributor is the strongest and most accurate distributor you can put in your boat. The housing is CNC machined from a billet of 6061-T6 aluminum creating a housing with no porosity. Internally, a QPQ coated shaft is guided by a sealed ball bearing and an extra long sintered bushing for high-speed stability. Each distributor uses MSD’s race-proven magnetic pick-up to trigger the ignition control. Mounted just above the pick-up is a mechanical advance assembly that is easy to adjust so you can dial-in an ignition curve to match your boat’s application (except PN 8366). For marine use, the distributor cap is bolted to the aluminum base. There are two flame arrestor holes with brass screens machined into the base of the distributor to prevent ignition of gas fumes that may build up in the engine compartment. A special Weathertight Connector is supplied to provide a positive-lock and water resistant connection. The Marine Pro-Billet Distributors have been tested by Underwriter’s Laboratory and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.

Your Name:
Friends Email:
Add a Personal Message:

Must be used with an MSD 6M-2 Ignition Control.

	8565 - Marine HEI Tower Cap with Wire Retainer
	8564 - Marine Distributor Cap
	8467 - Racing Rotor MSD Billet Distributors
	8561 - Iron Distributor Gear for MSD Chevy Marine Dists

  Average 0 out of 5

Give us your feedback on this product:

  

Thank you for submitting your comment!

Recent reviews:

By Anonymous Stator and pickup rust alot. These replacement parts would be nice to get seperately.