Dodge Late Model Coil, 2 Pin
Part No. 8228
Features
- Direct performance replacement for late model Dodge vehicles
- Works with stock ignition as well as MSD Ignitions
- CARB E.O. Approved
The MSD Blaster coil is a direct replacement for late model Dodges.
Fill in the information below then send by clicking "E-mail a Friend".
| Coil Specs | |
| Turns ratio: | 70:1 |
| Primary resistance: | 1.2 OHMs |
| Secondary resistance: | 13.7K OHMs |
| Inductance: | 3.9mH |
| Maximum voltage: | 40,000 Volts |
| Peak current: | N/A |
| Spark duration: | N/A |
| Weight: | N/A |
User Instructions:
| Recent reviews: |
    |
|
By Anonymous |
|
|
By Anonymous I recently purchased this coil for my 2001 dodge ram. I found the wiring harness would NOT fit the coil. In speaking with MSD's Technical Dept, they explained that the coil was designed for earlier model dodges; They further explained that Accel's wiring harness (part# 140021AA) will adapt to the coil. |
|
|
By Anonymous Have 1999 dakota with 5.9 and does not fit. Wire harness is not the same. |
