Products
Support
Purchase
Company
Garage
MSD Smart Switch, PN 8966
Back CLICK ON ARROWS TO CYCLE THROUGH THE NEW PRODUCTS Next

PodCastMSD Smart Switch

❚ Activate a device from 0-100% of a sensor’s voltage output signal.
❚ Connects to a wide range of sensors such as a TPS, MAP, MAF,
temperature (oil or water), nitrous or boost pressure.
❚ Built-in LEDs assist in calibration and switch activation points.
❚ Activate a circuit by supplying a ground or a 12 volt source.

This is truly a Smart Switch! Not only can you choose between supplying ground or 12 volts to activate a circuit, but you can do it through the use of a long list of vehicles sensors! As long as the sensor is within 0-5 volts DC with a minimum signal difference of 0.5 volt, such as TPS, MAP, MAF, water temperature, oil pressure, boost pressure, etc…the Smart Switch can be used!
The switch can be calibrated to ‘learn’ the sensor and it can be programmed to activate at a certain percentage of the sensor’s signal range. Such as activating a nitrous solenoid when the TPS sensor reaches 95% or when the coolant temp sensor reaches a certain level to turn on an electric fan.
To assist in setting up the Smart Switch there are two LEDs to alert you when it is in calibration or operation mode.

MSD Smart Switch PN 8966 buy one now

User Instructions
Adobe PDFMSD Smart Switch PN 8966

 

 

 

Look for the Buy One Now! icon and buy MSD products on our website!